Welcome to WAVPOWER

Synthetic Water Resistant Lithium Complex Grease (GWR)
Multi-Purpose NLGI #2 GC-LB Extreme Pressure Fortified. Superior lubrication and protection in automotive and industrial applications with extensive exposure to water.

Package sizes include:

14-oz. Cartridge
14-oz. Cartridges (case of 10)
14-oz. Cartridges (case of 40)
35-lb. Lug
120-lb. Keg
 

PRODUCT DESCRIPTION
AMSOIL Synthetic Water Resistant Grease is an extreme-pressure, multipurpose grease formulated specially for wet-duty performance. Its water washout and sprayoff resistance are ideal for wheel bearings of vehicles and trailers frequently exposed to water, mud, snow or ice. It is also excellent for use in plants, such as paper mills, in which machinery undergoes frequent or prolonged exposure to water.

Water Washout and Sprayoff Protection
AMSOIL Synthetic Water Resistant Grease derives its superior wet-duty performance from its peerless cohesiveness and adhesiveness. It holds together when exposed to water and clings tenaciously to metal surfaces when wet. Components remain protected during prolonged exposure to standing water or exposure to pressurized water.

Below: Water Washout Test (ASTM D 1264)

Rust and Corrosion Protection
AMSOIL Synthetic Water Resistant Lithium Complex Grease protects metal surfaces from rust and corrosion, both of which may be hastened or worsened by frequent or prolonged water contact. It seals metal surfaces against rust and chemically fights corrosion.

High and Low Temperature Performance
AMSOIL Synthetic Water Resistant Grease effectively reduces friction, helping high-speed components run cooler. It resists the damaging effects of high temperatures and oxidation so components stay deposit-free for optimal performance and long life.

AMSOIL Synthetic Water Resistant Grease may be used in place of separate high-temperature and lowtemperature greases.

Load Carrying and Extreme Pressure Performance
AMSOIL Synthetic Water Resistant Lithium Complex Grease protects components from metal-to-metal contact even under heavy loads. Its extreme pressure additives form a shield against sustained or sudden extreme loads for dependable protection against wear.

Service and Shelf Life
AMSOIL Synthetic Water Resistant Grease resists oxidation, high temperature degradation and additive depletion so effectively, it may be used for longer service intervals than conventional greases. AMSOIL Synthetic Water Resistant Grease also resists oil separation and offers a long shelf life.

APPLICATION
AMSOIL Synthetic Water Resistant Grease meets the highest performance standards set by the National Lubrication Grease Institute (NLGI), GC for wheel bearing applications and LB for chassis applications. It may be used in automotive wheel bearings, chassis or other applications for which an NLGI No. 2 GC or LB grease is recommended. Its unique water resistant formulation makes it ideal for use in components or equipment with frequent or prolonged water exposure. AMSOIL Synthetic Water Resistant Grease is compatible with most seal materials and most other greases.

TYPICAL TECHNICAL PROPERTIES

AMSOIL Synthetic Lithium Complex Water Resistant Grease (GWR)

 
AMSOIL GWR
NLGI GC-LB
Thickener
Lithium Complex
NR*
NLGI Consistency Grade
2
NR*
NLGI Performance Grade
GC-LB
GC-LB
Extreme Pressure Fortified
Yes
NR*
Penetration (ASTM D-217) 25°C [77°F], 0.1 mm
Unworked
295-310
265-295
Worked 60 strokes
265-295
265-295
Dropping Point (ASTM D-2265) °C [°F]
>260[>500]
220[428]
Water Washout (ASTM D-1264) 79°C [175°F] % loss
0.9
15 max
Oil Separation (ASTM D-1742) 24 hr. @ 25°C [77°F], % loss
2.4
6 max
Rust Protection (ASTM D-1743)
pass
1 max
Timken OK Load Test (ASTM D-2509), lbs.
45
NR*
Four Ball Wear Test (ASTM D-2266) Wear Scar Diameter, mm
0.56
0.6 max
Compatibility with other greases
excellent
NR*
Extreme Pressure, Four Ball Method (ASTM D-2596)
Weld Point, kgf.
315
200 min
Load Wear Index, kgf.
40
30 min
Meets Disc Brake Wheel Bearing Specification:
GM 4733-M
Yes
NR
GM 6031-M
Yes
NR
Chrysler MS-3701
Yes
NR
High Temperature Life (ASTM D-3527) Hours
124
80 min
Fretting Wear (ASTM D-4170)* Mg
9.7
10 max
Elastomer Compatibility (ASTM D-4289)
Volume change, %, GC
26.2
-5 to +30
Volume change, %, LB
5.7
0 to +30
Hardness change, durometer-A points, GC
-3
+2 to -15
Hardness change, durometer-A points, LB
-8
0 to -10
Leakage (ASTM D-4290), g*
1.0
10 max.
Low Temperature Torque (ASTM D-4693) n*m, max @ -40°C [-40°F]
8.2
15.5
Water Spray Off (ASTM D-4049), % max
6.9
NR*
*NR: Not Required for NLGI GC or LB labeling